Intelligent Smoke Damper Control Modules – MM.KTL.YD.005

Arif Alnahdi ANC Intelligent Smoke Damper Control Modules provide an advanced and integrated solution for controlling smoke and ventilation systems within intelligent addressable fire alarm systems.

These modules are designed to enable precise control and monitoring of smoke dampers using a single address per damper, reducing system complexity, enhancing reliability, and improving the efficiency of fire safety scenarios.

The modules operate seamlessly with Maxlogic addressable systems, allowing full integration between ventilation systems and fire alarm systems to achieve intelligent smoke management and protect escape routes.

Technical Specifications of the Intelligent Smoke Damper Control Module – MM.KTL.YD.005

• System Type: Intelligent addressable smoke damper control modules
• Number of Outputs: One output for damper motor control
• Supported Operating Voltages:
  • 24V DC
  • 24V AC
  • 220V AC
• Manual Control: Open/Close push buttons for local damper operation
• Remote Control: On/Off inputs for external control
• Fault Monitoring: Detection of open circuit or short circuit on:
  • Damper output line
  • Control inputs
  • Damper position monitoring inputs
• LED Indicators:
  • Green: Power
  • Yellow: Fault
  • Red: Alarm
  • Steady Green: Damper Open / Closed
  • Flashing Green: During opening or closing
• Status Monitoring:
  • Open / Closed / Damper Fault status displayed on the panel
  • Event logging within the system history
• Response Time:
  • Adjustable damper position change monitoring time
  • Fault alarm if no response is detected
• Addressing: One address per module (control + monitoring)
• Programming: Via Loop Manager+ software
• Standards:
  • EN 54-18
  • EN 54-17 (for models with short-circuit isolator)

Available Models of Intelligent Smoke Damper Control Modules

• ML-1356: Smoke damper control module – 24V DC
• ML-1356.SCI: 24V DC control module with short-circuit isolator
• ML-1357 / ML-1357.SCI: 24V AC (with / without short-circuit isolator)
• ML-1358 / ML-1358.SCI: 220V AC (with / without short-circuit isolator)

Key Features of ANC Smoke Damper Control Modules

• Full intelligent integration: Control and monitoring using a single address within the addressable system.
• Reduced hardware requirements: Eliminates the need for multiple relays and separate monitoring modules.
• Efficient smoke management: Supports dynamic damper open/close scenarios based on fire location.
• Escape route protection: Prevents smoke migration into stairwells and emergency exits.
• Operational flexibility: Supports delay modes (30 / 60 / 120 / 240 seconds).
• Instant diagnostics: Real-time fault and status display on the control panel and graphical software.
• High reliability: Fully compliant with European fire alarm standards.

Suitable Applications for Smoke Damper Control Modules

• High-rise towers and multi-story buildings
• Hospitals and medical complexes
• Hotels and commercial centers
• Airports and transportation hubs
• Factories and industrial facilities
• Any facility relying on advanced ventilation systems and protected escape routes

Contact Arif Alnahdi ANC now to obtain certified intelligent smoke damper control modules, including integrated fire scenarios design, supply, and professional programming tailored to your project requirements in Saudi Arabia.